416 in a tapped horn???

[LOUDER]

Has anybody used a 416 in a tapped horn ? I've more then 8 feet in a closet for a bedroom sub system. The ceiling is actually 101.5 ". And I have a 416 to use.

[GM]

Not that I'm aware of, though there was someone I did an Altec TH sim for a long time ago, but don't recall who/what/when, just TTBOMK it went nowhere.

Regardless, it was/need to be huge due to the super high Vas spec and from dim memory it must have been a GPA 416-8C as the sim looks familiar and right at 50 ft^3 net with a ~182" path length, so a single fold could tilt into an 8 ft ceiling.

Need Hornresp to view.

GM

edit: In trying to upload a 2 KB .txt file I get this error and when I click on view attachments it just shows smilies that I can turn off in the post, which doesn't work:

[h=Upload Errors]3[/h]

• GPA4168C25HzTH.txt - Exceeds your quota by 731 Bytes. Click here to view your attachments

Sum of all attachments owned by GM: 1,023.7 KB
Current Attachment Total: 1,023.7 KB


Finally figured out how to delete some old attachments, but now tells me I can't add an attachment!!! [h=Message]2[/h]GM, you do not have permission to access this page. This could be due to one of several reasons:

1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

Log Out Home

[GM]

Attached..........

[LOUDER]

GM thank you but my cheap laptop couldn't open the file. What's starting square inches, length and ending inches. I'll figure the rest out. thanks in advance..

[GM]

Hmm, it's a dinky little Notepad .txt file, so any MS machine should handle it fine.

You have to install hornresp [HR], then download the file to its IMPORT folder and click on it and it will install it as a new Record, then will probably have to read the HELP file [which can be converted into a WORD file for convenience] to understand what you're looking at: Hornresp

Note it's all metric, but for all critical dims you can highlight them, press F5 and a little pop-up conversion will give you imperial.

GM

[gearfreak]

wrong thread... sorry!